TAEevo TECH

Applications:
Plastics, automotive, chemical and pharmaceutical, food and beverage, laser, machine tools, rental, wineries

Certifications:

• The refrigerant R410A (ODP=0) ensures high performance thanks its outstanding heat conductivity properties;
• Innovative evaporator with immersed finned coil, characterized by low pressure drops and reduced sensitivity to impurities;
• The oversized hydraulic tank is standard and is able to compensate for the imbalances caused by sudden changes in load demand from the user;
• Wide operating limits (Minimum Twout = -10°C standard);
• Hydralic circuit adaptable for atmospheric and pressurized hydraulic circuits (up to 6 barg);
• Compact structure;
• Suitable for outdoor installation;
• Standard air condenser filters;
• Safety hydraulic by-pass;
• Wide range of accessories and kits for customized solutions;
• Easy installation, use and maintenance;
• Designed to operate 24/7 under the most demanding industrial conditions;
• Master/slave modularity from 2 to 5 units.

• Galvanized carbon steel sheet structure hot painted with polyester powders;
• Refrigerant: R410A;
• Parametric microprocessor controller;
• High performance hermetic scroll compressors;
• Immersed finned coil evaporator with copper pipes and aluminum fins inside inertial tank;
• Finned condenser coil with copper pipes and large aluminum fins protected by filters;
• Electronic expansion valve (from mod.031);
• HP/LP refrigerant manometers (from mod.031);
• Integrated hydraulic circuit configuration made up from: single or double circulation pumps with medium or high available head pressure, inertial tank, safety valve, air vent valve;
• Water flow pressure manometer;
• Phase monitor;
• Crankcase heater compressor;
• Axial fans with optimized profile;
• Conductive level sensor;
• Electric power supply 400/3/50;
• SEPR HT and SEPR MT Tier2 compliant.

• Pressurized Non Ferrous hydraulic circuit (mod.020-802);
• Close control regulation of the outlet water temprature through hot gas by-pass valve (hysteresis ± 0,5°C) (mod.020-351);
• Low ambient temperature version up to -20 °C mod. (031- 1002);
• Dual frequency version: power supply 400V/3/50 Hz – 460V/3/60 Hz (mod.020-161);
• UL508A – CSA 22.2-14 version: power supply 460V/3/60Hz.

• Evaporator anti-freeze protection;
• Single or double circulation pumps (mod.201-1002) with medium or high available head pressure;
• Open circuit circulation pump with medium available head pressure (mod.031-1002);
• Without pump version;
• Centrifugal fans (mod.031-161);
• High efficiency EC brushless axial fans with high head pressure (max 150 Pa) and inverter control (mod. 201-802);
• Electronic fans speed regulation (mod.031-802);
• EC brushless fans (mod.902-1002);
• Condensing coils protection with protective paint.

• Manual filling kit for atmospheric hydraulic circuits;
• Automatic filling kit for pressurized hydraulic circuits;
• Glycol filling kit for pressurized circuits;
• BSP-NPT hydraulic fittings;
• Automatic hydraulic by-pass;
• Centrifugal fans;
• Electronic fans speed regulation kit;
• Remote ON/OFF;
• Remote display;
• Supervisor system RS485, XWEB300D EVO;
• Master/slave modularity kit from 2 to 5 units.